Plumbing

DIY Encyclopedia

Short lengths of flexible and soft plastic that is very flexible and forgiving. Generally used for drain fittings in repair applications or to...

Part of the Ballcock. When the water level raises it, it shuts off the valve that lets water into the tank. Made of plastic or...

Activates the flush valve ball. Usually sold in combination with the trip lever. Attaches with a left-handed screw, which screws on in a...

Located at the bottom of the tank. Surrounds the opening that lets water into the bowl. Kept closed by a rubber flush ball or flapper. The...

Helps prevent oxidation and allows solder to flow freely. Comes in both liquid and paste. Necessary whenever sweating a...

Used to apply flux to a pipe. About 6"...

Has zinc coating that prevents rust if not scratched. Use primarily for carrying water or waste. Do not use for gas or steam. Common water...

Uses a high-speed rotating table powered by a sealed motor, it flings kitchen waste against a stationary shredder, cutter or grinder. This...

Uses a sliding wedge to move across the waterway, in either a rising or non-rising action. Used to completely shut off or open a waterway. Does...

Used when a valve must be opened and closed frequently under high water pressure. Used to control volume of flow. These valves have two...

Next Page » « Previous Page

Have Questions?

Get answers from local merchants, professionals and other DIYers in our online community.

Store Locator

Find an independent merchant near you.