Miscellaneous Electrical

DIY Encyclopedia

Used to determine if a wire or circuit can carry electricity from one end to the other. Generally consists of two probes (one of them being an...

Some models are battery operated and are wireless. They are easiest to install. If not battery operated, they require AC step-down transformers...

Most common type is plastic, usually 3/4” wide. Handy for many uses. In electrical work, it is used to cover bare wires after they have been...

Also known as a snake. Used for pulling the electrical cable or wire through the wall or through electrical conduit. Often comes in lengths...

Used to remove cartridge-type...

Used to mount cable to studs or other framing members. There are different sizes, so make sure you are recommending the correct...

Used to hold light sockets where design is not a concern. Often used in garages or basements, or as a temporary fixture. One type has a pull...

Analyzes a receptacle to determine whether or not the wiring is sound, if it is grounded and if the receptacle is receiving...

Also known as a test lamp, a circuit tester, a neon tester or a test light. Consists of two insulated wire probes and a small neon...

Used to connect the bare ends of two wires inside a box. At least two are required at every circuit connection. Available in a variety of sizes...

Have Questions?

Get answers from local merchants, professionals and other DIYers in our online community.

Store Locator

Find an independent merchant near you.