Toilets
DIY Encyclopedia
Search
Ballcock
Also known as a fill valve or inlet valve. Controls refilling the tank. Consists of multiple parts, but is commonly sold as a complete...
Bowl Gasket
Also known as a wax ring. Seals the joint between the toilet bowl and the drain piping in the floor. Some types have a plastic ring inside to...
Flapper Valve Seat Ball
Also called a Flush Valve Seat Ball, this device sits on the flush valve seat and attaches to the trip lever with a chain, rod or guide...
Float Ball
Part of the Ballcock. When the water level raises it, it shuts off the valve that lets water into the tank. Made of plastic or...
Flush Handle
Activates the flush valve ball. Usually sold in combination with the trip lever. Attaches with a left-handed screw, which screws on in a...
Flush Valve Seat
Located at the bottom of the tank. Surrounds the opening that lets water into the bowl. Kept closed by a rubber flush ball or flapper. The...
Standard Toilet
Made of vitreous china and finished with a high-gloss glaze. Designed to be durable and sanitary. White and almond are most common...
Tank-to-Bowl Hardware
Creates a secure connection between the tank and the bowl. Consists of long brass bolts with rubber washers and a large foam-rubber...
Toilet Seats
Made of plastic or kiln-dried hardwood. Hardware should be sturdy and non-rusting. Metal hardware should be solid brass with a quality...
Store Locator
Find an independent merchant near you.