I am installing some door casing and want to make sure the miters are tight. What’s the best way to do this?

By installing biscuits (with a biscuit jointer) to glue the miters together and then using a corner clamp to hold the two pieces firmly in place...


I need to clamp a piece of laminate trim to my counter tops. What clamp should I use?

A three-way edging clamp is designed for this purpose because it can apply pressure to three sides of a...


I need to clamp two pieces of wood together, but I don’t want to mar the surface. What should I do?

If you’re using a C-Clamp, you can simply put two pieces of scrap wood on both sides of the work piece so that any marring of the surface will be...