Siding & Roofing

DIY FAQs

Search

Do I need to put some kind of finish on my wooden shingle roof?

There are several different kinds of products you can put on your wood shingle or shake roof. Depending on the look you want, you can use...

 

Is a shake and a shingle the same thing?

No, there is a difference. A shingle is sawn and thinner at the butt than a shake. A shake is split on one or both...

 

What are some signs my roof is getting old or has problems?

When inspecting your roof, check for cracked, warped or missing shingles. Also look for seams that are loose and flashing that has deteriorated....

 

What is a “square” in roofing terms?

A square is 100 square feet of shingles on a roof. Shingles are typically sold in bundles and will tell you how many bundles it takes to make a...

 

Can dirt and debris buildup hurt my roof?

Yes. Dirt and debris such as limbs, leaves or pine straw can hold moisture that can cause mildew and damage to the...

 

What’s the difference between a roofing nail and a shingle nail?

A roofing nail has a large head for holding down asphalt roofing, which is typically asphalt shingles. The large head helps reduce “tear...

 

Why are the shingles I just installed already blowing off the roof?

One possible cause is that the shingles were laid in the fall or winter and the self-sealing tab never had the opportunity to properly seal. This...

 

Can I paint aluminum siding?

You can paint aluminum siding. Be sure to prep it properly by sanding with a fine-grit paper and clean it. Replace dented siding or repair with...

 

Do I have to tear off my existing siding before installing steel siding?

You don’t have to tear off existing siding. You do, however, need to make sure that the existing siding will hold nails and is...

 

What do I use to cut fiber cement siding?

Use a saw blade specially designed for cutting fiber-cement. Or, use shears and a score-and-snap...

 
 
 


advertisement