You don't the permission to view this video

  • Rings must be 1/4” larger in diameter than the rod for free movement. Some have eyelets for insertion of a drapery hook.
  • Ring Clips are oval or round. When pressed on the sides, the prongs open. When pressure is released, the prongs grasp the top of the drapery.
  • The Slip-On Hook fits over a rod or into an eyelet on the rod. The drapery heading fits between the two close-facing shanks on the opposite side of the hook.
  • The Pin-On Hook works the same way except that the drapery heading is hooked into the sharp pin, which is opposite to the side that hangs on the rod.
  • The Pleater Hook is used with pleater tape sewn to the drapery heading. Three or four prongs, or shanks, form pleats when the heading is placed onto the shanks.
  • Swagholders make decorative window treatments with ordinary fabric by draping and forming poufs, rosettes, bishop’s sleeves and festoons.
  • Fasteners for draperies include hollow wall screw anchors, toggles and plastic anchors. These work well in drywall, plaster walls, concrete blocks and other masonry materials.

Project Finder


Comments (0)